Paintless dent removal is a process that is used to remove small dents and dings from a car’s body without the need for painting. This is accomplished by using special tools to push and massage the dent until it pops out.
So how long is paintless dent repair been available? Get to know the facts as you read further this article.
Brief History Of PDR
Paintless dent removal has been around since the 1950s. It was originally used by the military to remove dents from aircraft. In the 1970s, a German company began using it to fix cars. PDR is now a common way to fix small dents and dings. It has gained in popularity in recent years as it becomes more affordable and accessible. Many people choose paintless dent removal over traditional methods because it is less expensive and time-consuming. It can also be done in a single visit, whereas traditional methods may require multiple visits.
How It’s Done
The PDR process is relatively simple, and can be broken down into the following steps:
1. Locate the dent. This may seem like an obvious step, but it is important to identify the exact location of the dent before beginning the repair process.
2. Apply pressure. The technician will use their hands or a plunger to apply pressure to the dent from the inside. This will help to push the dent outwards and make it easier to repair.
3. Use a tool. There are a variety of tools that can be used for paintless dent repair, such as a suction cup or metal rod. The technician will choose the tool that works best for the size and shape of the dent.
4. Push and pull. The technician will gently push and pull on the tool until the dent pops out. Be careful not to damage the surface of the car with the tool.
5. Smooth it out. Use a cloth or your fingers to smooth out the area where the dent was located. This will help to blend in the repair and make it less noticeable.
Paintless dent repair is a great way to fix small dents and dings without having to visit a body shop. The process is relatively simple and can be done by anyone with a little bit of experience, but it’s highly recommended to let a professional do it to ensure quality results.
Types Of PDR Process
There are two main types of PDR: manual and electromagnet.
Manual paintless dent removal (PDR) is a process that uses various tools to push and pull on the dented metal until the dent pops out. This is a manual process, so it requires a lot of time, patience, and skill. There are many different tools that can be used for PDR, including suction cups, pry bars, and hammers.
The first step in manual PDR is to identify the location of the dent and the shape of the damage. Once the technician has determined these things, they can begin to pry and push on the metal to try to remove the dent. It’s important to be careful not to damage the paint or surface around the dent. If the technician is having trouble removing the dent, they can try using a hammer or other tool to help loosen it.
On the other hand, electromagnetic PDR is a relatively new process that uses electromagnets to remove smaller dents from vehicles. The magnets create a force that pulls the dent out from the inside, which requires less force and results in less damage than traditional PDR methods. This process is particularly useful for removing dents from cars that have alloy or plastic bumpers, as it is less likely to cause damage to the surface of the bumper.
How Long Does The PDR Process Usually Take
Most of the time, PDR takes about an hour to an hour and a half to finish. However, there are some cases where it can take up to two hours. On average, most PDR jobs will cost between $75 and $200. However, there are some companies that will charge more or less depending on the severity of the dent.
One of the reasons that PDR takes less time to complete than traditional car repair methods is that there is no need to paint over the damage. This means that there is no need to wait for the paint to dry before moving on to the next step in the repair process.
Just to give you an idea, most traditional dent repair usually starts with the removal of the trim around the dent. The area is then cleaned and dried before being clamped in place. A tool is used to push and pull on the metal until the dent pops out. This can be a long, frustrating process, and often requires sandpaper or body filler to smooth out the area once the dent is gone.
In severe cases, the car may need to be repainted. To repaint a car’s body, the old paint needs to be removed. This is usually done by sanding it down until the new paint can stick to the surface. The car is then primed and painted with a color of your choice. The whole process can take a few days to complete, and it can be quite expensive.
Another reason that PDR is often faster than traditional dent repair methods is that there is no need to remove the bumper or trim from the car in order to fix the damage. This can save a lot of time and hassle when it comes to repairing a car.
PDR is not only faster than traditional car repair methods, but it is also less expensive. This is because there is no need to buy new parts or paint for the car. In addition, PDR does not require the use of a lot of expensive tools.
However, it is also important to note that this repair process also has its limitations. To be specific, paintless dent repair can be used to remove most small dents, but it cannot be used on bigger dents or ones that have been caused by a major collision. It is also not suitable for fixing rust damage or removing hail damage.
Add Comment